MTS USB Internet dongle with Mac OSX Lion

by admin on November 16, 2011

For those who are facing a problem with MTS USB Internet on MAC 10.7+ system, here’s a solution:

Uninstall/delete your older MTS dialler application.

You will need ‘CrossPlatformUI-V2.1.2-SSTL.dmg’ (which is available on the ZTE website)

After installation, plug your MTS dongle and  go to
System Preferences > Network > ZTE Wireless Terminal.


Configuration: Default
Telephone Number: #777
Account Name:
Password:  MTS

Save and click connect. That should work.


Please give a link for CrossPlatformUI-V2.1.2-SSTL.dmg so far I have been unable to find it

by neonline on December 10, 2011 at 12:13 pm. #

download it from here:

by admin on December 22, 2011 at 9:28 pm. #

thanks brother, I was looking for same solution and facing problem with the URL to download the dmg file. much appreciate your posts.

regs, pradeep

by pradeep on July 5, 2012 at 12:43 pm. #

Hey, bro… I tried a lot.. but it didn’t worked. I downloaded ‘CrossPlatformUI-V2.1.2-SSTL.dmg installed it. But still it didn’t worked. When I connect my dongle nothing happens. I tried to connect, but I failed. Please help.

by Tejas on November 24, 2012 at 3:32 am. #

I have Mac OS X 10.5.8

by Tejas on November 24, 2012 at 3:34 am. #

I am sorry, but you will have to upgrade your OS.

by admin on November 28, 2012 at 4:09 pm. #

try this thread:

by admin on November 28, 2012 at 4:17 pm. #

i am using mblaze ultra and it was working fine with my mac but all of a sudden it stopped working.when i click on connect it changes to disconnect and does change back to connect and to close it also i have to force quit. please help.

by tushar on February 4, 2014 at 7:13 pm. #

Did you upgrade your Mac OS? What version of the OS are you using?

by admin on February 4, 2014 at 7:21 pm. #

I have OS x 10.7.4 , would the new mst mblaze ultra work on this operating system?

by paul on March 9, 2014 at 4:59 pm. #

It should. You can get the MTS Mac Software from:

Else this is also known to work:

In your software setting options , verify whether the phone number is #777, username as “” and password as “MTS”

by admin on March 17, 2014 at 4:43 pm. #

hello, i bought new mts ultra, and m using mac os x 10.9.2
i tries as written above but it fails can u help me out

by shery on April 25, 2014 at 8:45 am. #

Can you tell me what deice it is? Is it a ZTE?

by admin on June 28, 2014 at 4:52 pm. #

hello! I have mac os x 10.7 and i’m having a mblaze (huawei)
plz provide me the link for suitable soft. tool for my dongle

by Abhishek soni on June 29, 2014 at 5:30 pm. #

Try downloading these drivers here.

– Unzip
– Control click/right click on the installer file
– select ‘Show Package Contents
– look for ‘mobile manager.pkg’
– right click and select ‘Show Package Contents’
– You should find something like ‘huawei_universal_425_05.pkg’
– install this
– Plug in your mBlaze device
– open ‘System Preferences’ select ‘Network Preferences’
– Your Huawei device should be detected : Select Huawei in the left hand column
– In configuration: Default, use telephone number *99#
– try connecting
(You will have to check this: I think for MTS the username is and password is MTS)

by admin on June 29, 2014 at 5:44 pm. #

I have mac os x 10.10 and i’m having a mblaze ultra (huawei)
its not connecting and showing connection terminated. pls help me.

by Akshaya on November 6, 2014 at 9:21 pm. #

Thanks. The phone number needed change. Its working now.

MTS service centre in Tamilnadu sucks. They didnt know what is macbook. The lady thought its micromax-book.
The service centre TL promised me to call me up in 10 min today (31st Dec 2014) but never called up.
@MTS, i spent 45 min in call twice, first time they disconnected it. I repeatedly asked them to provide if there is any alternate phone number. She told you put 9150**** number, which is my mts phone number.

Its too bad to have such persons in support who suck your time and money.


by Sujit on December 31, 2014 at 4:45 pm. #

Sujit, can you help Akshay? Are you on Mac OS X 10.10?

by admin on January 10, 2015 at 10:29 am. #


by HARKIRAT SINGH on January 10, 2015 at 10:57 pm. #

Try this:

Should work on MTS.

by admin on January 19, 2015 at 1:17 pm. #

How exactly can i try the last link…bcos wen i insert the data card …it is not booting up….i really need the modem working…admin plzz help

by gowtham on January 25, 2015 at 11:24 am. #

Try another USB port? Try a USB hub? I had a data card that wouldn’t work on one port, but on another. And once, a data card would ONLY work when connected via a USB hub!

by admin on January 25, 2015 at 11:40 am. #

Hi there ,

I have the similar problem mentioned by Akshay . Can someone please provide me the detailed steps performed to resolve this issue ? Any help will be appreciated .. Thanks .

by Partha on February 4, 2015 at 7:09 am. #

Hello. I have MTS Mblaze internet dongle but like some other commentators recently upgraded my MacBook Pro to Yosemite and now It’s not able to connect. Do I need to download or is there any other way? The problem of course is that I can’t get the computer online in order to download anything. I’ve been using my friends computer in the meantime. Then again there’s always a public coffee shop with wifi if need be…. just seeing if it’s essential to download or if there’s any other way around it? Thanks again for the help. I’ve written to MTS twice and they do not reply.

by Maitreyi on February 12, 2015 at 7:07 pm. #


I am having Mblaze ultra and want to use with 10.9.5, I have followed the comments but didn’t get a clear picture, I am having mts from ZTE,

please see if u can help me,..

by yeswanth gantasala on February 14, 2015 at 10:28 am. #

Let me check if anyone I know has an MTS Modem. Will make it work.

by Param on February 25, 2015 at 8:52 am. #

Follow these steps:
go to system preferences.. Open Network..



Account name and password (You will have to check this: I think for MTS the username is and password is MTS)

Now go to ADVANCED




Press ok

Then CONNECT.. Enjoy..

Works for Model : MF190


For more ZTE drivers, check their website here.

by admin on March 8, 2015 at 3:04 pm. #

my device is mblaze lava can u help me im using mac yosemite

by anish on April 18, 2015 at 10:32 pm. #

Let’s look into this.

by admin on April 22, 2015 at 10:45 am. #

which macbook ox contect dongle.plz help us

by bhupender sharma on April 30, 2015 at 4:48 pm. #

hi i have purchase M Blaze Ultra Wi Fi. i want to install it on
OS X YOSEMITE Version 10.10 . but no response from any link U TOLD ABOVE .

by ankit on April 30, 2015 at 11:11 pm. #

@Ankit: The MTS mBlaze Ultra WiFi doesn’t need to be installed. Just connect it to any USB power source and access the WiFi. Check with MTS Support on securing your WiFi win suitable and robust passwords.

by admin on May 1, 2015 at 12:59 pm. #

I purchased an MBlaze Ultra Wifi LAVA, I use a Mac OS X 10.9.5 . How do I get this configured? The MTS site doesn’t open.

by Matthew on June 13, 2015 at 2:31 pm. #

Hi Mathew. It’s a WiFi data card. So power it.
Then connect your Mac to the MTS data card Wifi.
Check your retailer for the default password.
Check your manual for configuring. Typically once you have managed to connect to the Wifi. accessing the data card configuration page is via this address on your browser: or such.
Your user manual or retailer will have default usernames and passwords for this page.

Once accessed you can configure, change the username, wifi name and password.

by admin on June 17, 2015 at 8:03 am. #

Hi Respect dear

I having ZTEMT USB MODEM model no: AC2746 i want to use with OS X 10.9.5, I tried connect to internet after setup program but not working!!. and I download CrossPlatformUI-V2.0.6 But still it didn’t worked… plz help me if you can.

by Khalid on October 15, 2015 at 9:47 pm. #

hi i have mac 10.11 i can’t install mblaze software its saying the installation nt completed there is no software to install
provide me a link to download mblaze software

by sundharkannan sk on November 2, 2015 at 8:28 pm. #

Its not working on my mac os x 10.10.3, Yosemite. is there any way that i can use mts m blaze LAVA 800I???

by ALOK A S on November 9, 2015 at 1:55 pm. #

I purchased an MBlaze Ultra Wifi LAVA, I use a Mac OS X 10.8.5 . How do I get this username and password?????

by Markin on November 10, 2015 at 7:31 am. #

@Markin : Your username and password would be mentioned in the manuals in your purchase box. You can also contact MTS customer care here:

by admin on November 25, 2015 at 12:50 pm. #

@ ALOK AS : Your device is WiFi. You just need to switch it on and access the wifi on your mac.

by admin on November 25, 2015 at 12:51 pm. #

@sundherkannan : Your device is also Wifi. Just check teh original manuals. You shouldn’t need a software to install.

by admin on November 25, 2015 at 12:52 pm. #

I lost my broadband number.
How I see my broadband number
HUAWEI MTS broadband helpline number

by Govind Kumar singathiya on February 5, 2016 at 3:24 pm. #

I have MTS mblaze AC2746 than how should I install it in os x 10.10.5 . when i tried to install cross platform ui v2.2.7 sstl.DMG but it doesn’t work.

by nitin on April 8, 2016 at 8:12 pm. #


– insert the ZTEAC2746 on your Mac’s USB port
– go to system preferences – network
– You will see a ‘USB Connection’ on the left column. If not, at the bottom off the column, click the ‘+’ sign.
– select your interface and service name from the right hand column’s drop down : It should be something like ZTEUSBmodem or so.
– In the fields, set Configuration = Default, Telephone Number = #99*, account na,me and password blank (unless your MTS has these)
– Set Vendor: Generic and Model: GPRS(GSM/3G)
– save and connect.
Should work.

if required, you should be able to download drivers from :

by admin on April 19, 2016 at 8:18 pm. #

I am using OSX El Capitan Version 10.11 (15A284). And my MTS dongle is MTS Blaze Ultra(Huawei). I am unable to connect to internet.
When installing MTS software, it says no software to install. Whereas following the above comments also didn’t work.

Can you please help? Thanking in anticipation…

Further references:
However, I was able to connect on my other MAC osx(10.10.5), using the following steps given in comments:

1. Try downloading these drivers here.
– Unzip
– Control click/right click on the installer file……..

2. Try this: ……

by 10.11user on July 3, 2016 at 2:04 pm. #

Found the solution:

Following works:

by 10.11user on July 3, 2016 at 2:23 pm. #

hi i have (huwaie ) mblaze dongle i m trying to use it on macbook air,10.11.3 os x ei captain ,whenever i try to install it says software not found.plz help me.Mts people are helpless in this.

by parul on July 25, 2016 at 3:32 pm. #

i have macbook pro os x 10.9.5.. not able to install mts.. need help

by 123 on October 14, 2016 at 4:04 pm. #

I recently updated Mac OS to sierra and since then dongle not working as usb instead only wi-fi hotspot. I don’t want to use wi-fi because it has security issues. I want it to work like a usb dongle where I can connect and re-connect internet like before. I tried to install crossplatform (like you mentioned) but did not work. Please help else the device is of no use.

by Anita on November 25, 2016 at 4:32 am. #

Hmmm… we haven’t been able to check the dongle with Sierra. But if you have a good strong password, WiFi shouldn’t be a problem.

by admin on December 5, 2016 at 11:56 am. #

Leave your comment


Required. Not published.

If you have one.